c0500,c0501 minolta DI152,DI1611,bizhub162,bizhub163
July 3, 2009
how to reset this trouble ,reason for this code:
first- try to reset code c0500/c0501 : turn on the copier while you press stop key.
- the trouble was reset? ok
-the trouble show again? Check following parts: micro switch S2-you can adjust pressure and good work on that switch.
check also if the metal lever that push on microswitch work fine.In most cases this lever is set wrong or is realy broken (the hole below it)
If everything seems to be Ok, remove the fusing unit and check thermosta(thermal fuse) or tube lamp
c0700 on minolta di350, di250
June 3, 2009
-toner motor is unable to rotate the toner bottle= The most likely cause is wrong pointing of toner bottle
Solving:
turn of the copier, pull out the toner bottle(don’t rotate the bottle
turn on the copier :
1. hear the noise behind the copier then- c0700 = the toner motor or toner rotate mechanism was broken -you must change the toner rotate mechanism or change all (motor +mechanism) with a new toner motor from EP 1050/1054-it works perfect.
2. c 0700 code appears immediately : first -check and repair the toner rotate mechanism-see above-
:second- replace the blowed 1A fuse on PWB-A with new one
turn on the copier — everything seems ok ? insert toner bottle in correct position
bizhub c203/253/353
May 17, 2009
new series on colour copiers .
how to
bizhub c250—bizhub C203 and new colour series -trouble reset procedure
May 17, 2009
When an error code appear the best way to solve it is to write the code and then call a technician.
Anyway, for reset code you can try the following procedures :
-first -open and close the front door: if the defect is minor, the code will be reset
-if the code does not disappear after this procedure, open front door and turn off the copier(main switch).
Press utillity/counter and turn on the copier. Keep pressed until ,,trouble reset” is on the screen.
Touch ”trouble reset’ —–will appear –OK
Turn off the copier. After 10 sec. turn on again.
If the code reappears ,you will have to wait for a technician.
LAN connections with router
April 22, 2009
To connect network equipment (copiers or printers) with a fixed IP but others device have IP addresses assigned automatically :
Connect copier’s LAN cable in router .
Usually assigned by the router addresses are like 192.168.xx,yy
for copier the IP adress must be 192.168.xx.yyy
color toner compatibility
April 4, 2009
Old color copiers :
CF 910=CF911P=CF9001=CF1501=CF2001
new color copiers:
CF3102=CF2002=BIZHUB C350/450=BIZHUB C250/252=BIZHUB C451/550/650= BIZHUB PRO C6500
bizhub c350 color shift trouble.
March 21, 2009
First-Be sure to check the correct setting in color shift registration adjustment:
Put a A3 paper on bypass tray, in service mode run color shift adjusment .
After that- remove the fusing unit . Under fusing unit check the sensor (loop sensor ) and the actuator movement .
Check also the actuator spring and fix it.
Reinstall the fusing unit .
Run again color shift registration in service mode .
Dialta 152, dialta 183, di 1611/2011,bizhub 162,bizhub163
March 1, 2009
Minolta di 152 B/W copiers , 15 ppm, optional printer PI1802. -how to reset maintenance M2 -J– code -toner spilling -how to replace broken mylar -how to fix the cleaner unit (noise), how to rest trouble code c0500, co501
Bizhub 420/500/421/501
February 24, 2009
Konica based machine -c2403 -c2801 -c2804 -all needed modif. for toner trouble codes
bizhub C451/550/650
February 18, 2009
c550
-description : color laser copier/printer/scaner