dialta di152 trouble

March 1, 2009

how to maintenance code reset :

utillity-stop -0-0-stop- 01-3-start-3-start-3-start.on display will be  apear 00 .Press now ‘clear’ key .on display will be apear 40000 .Touch  ’start’ and reset panel .That’s it !

code J– reset :

open the right door- check tension spring and lever’s movement  in right side of the fusing unit . The tension spring is usualy too weak , so change it with new one , more strong. Then clean sensor and check correct highness of actuator(in sensor  frame). If the actuator is too down -loosen screws of fusing unit , push up the fusing unit-in right side  and tight screws.

Fix minolta di 152, minolta di 183 in same way.

spilling toner from imaging unit :

-remove the imaging unit ond open it in usual mode.

-remove the cover of the developing unit

-check in right (back) side of magnet roller -condition of the mylar .If  is broken change it with a new one .you cane made new one from thin OHP film.Insert it under doctor blade and put here  some adhesive (super bond, super glue). Meantime  clean charging corona , charging grid , and replace drum in was broken from old mylar.Check also or replace the roll :

roll

4163-5298-01

 

 

Fix minolta di 152, minolta di 183,,minolda di1611, minolta di2011, bizhub 162,bizhub 163 ,bizhub210 in same way.

 

how to fix cleaner unit : ….soon

Written by admin · Filed Under Troubleshooting 

Comments

Got something to say?





Digital Copier B/W

In this is an area on my website you can find answers for more problems about B/W digital copiers.
Continue reading »

Digital Color Copier

In this is an area on my website you can find answers for more problems about Color digital copiers.
Continue reading »

Color printer #3

TIn this is an area on my website you can find answers for more problems about color printers.
Continue reading »